If you’re like most people, you probably don’t think about your air conditioner until it’s not working. And even then, you might not know what’s wrong. One of the most common problems with air conditioners is a dirty blower. This can cause all sorts of problems, from decreased efficiency to bad smells. In order to keep your air conditioner running smoothly, it’s important to know about aircond blowers and how to clean them:
Contents
What is an Aircond Blower?
Aircon blowers are an important part of air conditioners. They circulate the air within the unit and help to distribute the conditioned air throughout the room or house. The blower consists of a fan and housing that encloses the fan blades. The housing is usually made of plastic or metal, and it may be located behind the front grille of the air conditioner unit.
Some air conditioners have a separate blower unit that is mounted on the wall or ceiling. Aircond blowers are powered by electricity, and they typically operate at a fixed speed. However, some models allow you to adjust the speed of the blower, which can be helpful if you need to reduce noise levels or save energy.
The Different Types of an Aircond Blower
There are different types of aircon blowers which are classified according to their function and features. The most common type is:
Single-speed blower
Single-speed blower has one speed setting that cannot be changed. This type of blower is often used in small rooms or spaces because it is less expensive than other types of blowers. If you have a larger space, you might want to consider a two-speed or variable-speed blower.
Two-speed blower
Two-speed blowers have two speed settings: high and low. This type of blower is often used in larger rooms or spaces because it can circulate the air more effectively than a single-speed blower. You can also use a two-speed blower to save energy by using the low setting when you don’t need the full power of the blower.
Variable-speed blower
Variable-speed blowers have multiple speed settings that can be adjusted to meet your needs. This type of blower is often used in large rooms or spaces because it can circulate the air more effectively than a single-speed or two-speed blower. You can also use a variable-speed blower to save energy by using the lower settings when you don’t need the full power of the blower.
How to Clean an Aircond Blower
If your air aircond is not blowing as much air as it used to, it might be time to clean the blower. The good news is that this is a relatively easy process!
Step 1: To get started, flip the cover of your aircond so you can access these washable filters. Use water and soap with a neat cleaning pad to gently scrub them clean. You can also use a vacuum with a soft brush attachment to remove any dust or debris.
Step 2: The next step in cleaning your aircond system is to remove the flap and vane pieces that cover it. These are held on by clips or tensioners, so they should come off pretty easily once you’ve got access. Be sure to clean these pieces thoroughly, as they can accumulate a lot of dirt and dust over time.
Step 3: Now that you have cleaned the impeller, be sure to wipe away any dust or dirt left on it with a half-inch paint brush. Make sure there is nothing left and then wash your hands thoroughly so they are free from all germs before touching anything else. You can also use a toothbrush to clean the aircond blades if needed.
Step 4: Always be sure to clean your unit after using it, especially if you’re seeing clogged vents or dirty water. Use a slightly damp rag (so as not to damage anything) and wipe away any dirt that’s on the surface of each impeller until there are no more signs for them. While you’re at it, it’s also a good idea to check the gasket for any cracks or leaks. This is an important step in keeping your unit running properly and avoiding any future issues.
Step 5: Finally, turn on the air conditioning unit and wait for the blower to start circulating air. If everything looks and sounds good, then you’re all done! Congratulations on successfully cleaning your aircond blower.
However, if you are not confident in your ability to clean the blower, it is always best to consult an aircond service specialist. They will be able to properly diagnose the issue and provide you with the best course of action. This can also save you time and money in the long run.
The Bottom Line
An aircond blower is a vital part of your aircond system, so it’s important to keep it clean. There is nothing worse than an aircond unit that is not functioning properly. By following the steps above, you can easily clean your blower and keep your aircond running smoothly. However, if you are unsure about anything, be sure to consult an aircond specialist. They will be able to assist you and ensure that your aircond is running properly.